Guide to Resolve Error 0x000003eb

 Guide to Resolve Error 0x000003eb


If you are trying to install a printer but can’t do so because of the error code 0x000003eb then you are at the right place as today we are going to discuss how to fix this issue. The error message doesn’t give you much information as it just says unable to install the printer and gives you the error code 0x000003eb.


But if you troubleshoot the issue you must have concluded that this must be a problem with printer drivers being incompatible or corrupt. And you are right, the printer connectivity or installation error 0x000003eb occurs because the drivers are somehow got corrupted or incompatible. So without wasting any time let’s see how to Fix the Printer Installation Error 0x000003eb.





Steps by Steps to Troubleshoot "Error 0x000003eb":- 


Reinstall in Clean Boot


Try to install the printer in a clean boot and see if this solves the problem. To help you solve error messages and other problems, you can start Windows with a minimum of drivers and startups. This type of start is called a clean boot. A clean boot avoids software conflicts.

Steps to follow to make a clean start and check that the problem is present.


i. Click on Start, type msconfig in the Start search box, then press ENTER.

ii. If you are prompted to enter an administrator password or confirmation, enter the password or click Next.

iii. In the General tab, click on Selective Start.

iv. Under Selective Start, clear the Load Startup Items check box.

v. Click the Services tab, select the Hide all Microsoft services check box, and then click Disable all.

vi. Click on OK.

vii. When prompted, click Restart.

viii. After starting the computer, install the printer.


Delete the printer keys

  1. Save your registry settings.
  2. Once the register is registered, stop the print spooler service from the service console.
  3. Now go back to the Registry Editor and delete the following keys:
  4. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3
  5. HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Drivers\Version-3
  6. Now hold down the Windows key and press R, enter the following path in the Run dialog box:
  7. C:\Windows\System32\spool\driver\w32x86\3
  8. Here, rename the three to three old ones.
  9. Restart the “Print Spooler” from the service console and reinstall your printers.
  10. Once this is done, reboot your PC and try to reinstall it.


Check Windows Installer service


1. press Windows + R, then type services.MSC and press Enter.

2. Locate the Windows Install service in the list and double-click it.

3. Make sure that the start type is set to Automatic and click Start if the service is not already launched.

4. click Apply, then click OK.

5. Try to reinstall the printer.


Disconnect unnecessary devices


Disconnect external devices and try to install the printer. Steps to install the printer.

Go to the Device Manager and disable it:

i. sound card

ii. video card

iii. network card

iv. modems

v. Ports (serial and parallel)


Note: If this Will Not Fix your Printer From 0x000003eb Error you can contact a Printer professional. 


Contact Detail is in Mentioned Blog.


Source: https://uconnect.ae/read-blog/29733


Location: Apopka, FL, USA

Comments

Post a Comment

Popular posts from this blog

Steps to fix Brother Printer Error State.

  Brother Printer in Error State Windows 10  is a very common issue that the user’s features very often. The users get this error while they are working to print any document but the command is not getting done. If you are using a wicked or old printer driver, then you might take this error.    If you catch this error, do not panic. Resolving this error is not a difficult job. So, in this blog, we are going to present some possible ways to troubleshoot the Brother printer in error state issues.   Reasons that Causes Brother Printer in Error State Windows 10: BIOS issue is a common factor that causes the error in printers Virus or malware attack Brother printer driver gets corrupted Connectivity issues, or lack of high-speed internet Maybe wires or USBs are not placed correctly Conflict in installed drivers Outdate brother printer drivers Problem with Windows System File Issues in parallel port Maybe a specific printer hardware device is not working properly. ...
Read more

Canon Printer Error 5011

Image
Full Solution of Canon Printer Error 5011 Canon printer error 5011  is also one of those errors that stop the printer from working. There are some methods by applying which you can easily resolve those errors. Here, we will discuss the canon printer error 5011 and also 4 easy steps by applying which you can easily troubleshoot the error from your printer. We can see various types of errors in our canon printer. The  error 5011  is one of those errors which we can see facing by our canon printer. If the cartridge holder becomes constant and refuses to move to the center then this error 5011 occurs in your canon printer. When this error occurs in the canon printer and you are going to print a document, then the error message signifying the error 5011 is displayed by your computer or by your canon printer. This error is indicating a technical error that occurs in your canon printer.  Here we discuss four solutions by applying which the canon printer users may able to re...
Read more

Hacks & Tricks to Resolve Canon Error Code 6000.

Image
While Canon's automated printers and scanners are highly advanced, there can still be several errors. One of the most common errors, however, is  Canon Error Code 6000  that a user has to deal with quite often. In this guide, we have compiled methods to fix printer error 6000 on Canon Pixma and other essentials you must know .  How to Fix Canon Printer Error Code 6000:- There are so many hacks to fix the error 6000. Follow these steps and you can get your solution to fix the error 6000. So, start reading: Hacks that Fix Canon Printer error code 6000:- Hack 1: Reset or Restart the Printer: To Reset or Restart your printer might help you to resolve the error 6000. To do so, you need to go through the below steps: First of all, unplug your Printer from the Power button. Then, leave it for a few seconds in the Pause Mode. After that, plug the power cord into the power plug and turn on the printer. Now, press and hold the power button for some time. Next, press the Stop button...
Read more