Hacks & Tricks to Resolve Canon Error Code 6000.

While Canon's automated printers and scanners are highly advanced, there can still be several errors. One of the most common errors, however, is Canon Error Code 6000 that a user has to deal with quite often. In this guide, we have compiled methods to fix printer error 6000 on Canon Pixma and other essentials you must know. How to Fix Canon Printer Error Code 6000:-

There are so many hacks to fix the error 6000. Follow these steps and you can get your solution to fix the error 6000. So, start reading:

Hacks that Fix Canon Printer error code 6000:-

Hack 1: Reset or Restart the Printer:

To Reset or Restart your printer might help you to resolve the error 6000. To do so, you need to go through the below steps:

1. First of all, unplug your Printer from the Power button.
2. Then, leave it for a few seconds in the Pause Mode.
3. After that, plug the power cord into the power plug and turn on the printer.
4. Now, press and hold the power button for some time.
5. Next, press the Stop button twice.
6. Repeat this procedure one more time. At this time, release the Power button.
7. Now, press the Stop button four times.
8. Finally, check if the issue persists or not.

Hack 2: Remove Paper Jam:

1. Open the door to access the stuck paper in between the rollers.
2. Pull out the papers. And if you are not able to remove the stuck paper, then move to step 3.
3. From the menu shown in the display, search for service mode.
4. Pull out the paper in service mode as now the distance between rollers will increase.

Hack 3: Clean Rollers and Remove Blockage:

1. Switch on the printer and put it into service mode.
2. Open the doors of the printer and remove any obstacles in between.
3. And remove the rollers and clean them using cotton with 10% alcohol.
4. Reinstall the rollers and restart the printer.
5. Test print a document and check if it working now.

Hack 4: Update the Device Driver:

You can fix this issue by updating the device driver. Therefore, you need to follow the instructions mentioned below:

1. Firstly, click on the Start menu.
2. Type 'device manager' there and open the Device Manager.
3. Now, expand the category 'Network Adapters' and select your device.
4. Right-click on the device icon.
5. After that, click on the Update Driver option and choose 'Search automatically for updated driver software.
6. At last, confirm it by pressing the Ok button and wait for a few moments.
7. After completing this process, turn on your device again and check if the issue is resolved or not.

Hack 5: Insert a Paper:

While you want to get different copies at a time, then it makes a harmful effect on paper scanning. To resolve this, follow the directions:

1. Go to the printer window and select 'Preferences.
2. After that, click on the 'Printer Properties option.
3. Then, choose 'Advanced'.
4. When the printer's advanced properties window appears, click on 'Paper size' to set the new custom size.

Read More: Methods That Fix Error 0x000003e3 in 5 minutes

Hack 6: Check Whether the Printer is Installed Properly or Not:

There is likely some installation problem inside the printer that results in this glitch. Also, your printer might not be connected properly to your device. So, you should figure out whether the printer is installed properly or not.

1. First, go to the Start button and click on 'Settings'.
2. Then, choose 'Devices'.
3. Next, go to the 'Printers and scanners' section to look for your printer.
4. If you can not find out the printer, click on the 'Add a printer or scanner option.
5. Then, wait for a while.
6. Finally, your system will detect your printer. Also, check if the printer is turned on or not. Make sure that your printer is connected properly.

Famous Tech Author: Robert John – Printer Expert

Social: Youtube || Linkedin